FAQ

Avoid harsh solvents or abrasive cleaners, as they can break down the resin. Always consult the manufacturer’s care instructions to ensure safe cleaning practices.

If imperfections like bubbles or streaks appear, you can lightly sand the surface and apply another coat. Minor issues are usually easy to fix with touch-ups.

Resin floors are incredibly durable and can last anywhere from 5-20 years, depending on usage and maintenance. Proper care and maintenance can significantly extend the lifespan of your floor.

Discoloration can happen due to exposure to sunlight, chemicals, or dirt build-up. Regular cleaning and, if necessary, a re-coat of resin can restore its original color and shine.

Small scratches or damage can usually be repaired by lightly sanding the affected area and applying a fresh coat of resin. For larger repairs, consult our support team for the best approach.

Walking on the resin before it’s fully cured can leave marks or cause the finish to become uneven. It’s essential to allow the full curing time for optimal durability and appearance.

If your resin has not cured correctly, it could be due to improper mixing, incorrect environmental conditions, or inadequate surface preparation. In this case, you will have to remove the uncured resin by crapping and grinding, please contact us for guidance.

No, please consult relevant product data sheet for more information.

Regular cleaning with a soft mop and non-abrasive cleaning solution is recommended. Avoid harsh chemicals or abrasive scrubbing that could damage the surface.

Resin floors can take 24-72 hours to fully cure, depending on the product and environmental conditions. Full curing ensures maximum durability and resistance.

Typically, you should wait overnight between coats. Ensure the first coat is dry to the touch but before applying the second coat. Follow the individual product data sheets for more specific recommendations for the best results.

Resin products should be applied within a recommended temperature range, typically between 5°C and 25°C. Applying in cold temperatures can affect curing times and finish quality.

Yes, resin products require thorough mixing before use. Make sure to mix components as per the instructions given on the data sheet.

For most applications, two coats of resin are recommended for optimal coverage and durability. However, this can vary depending on the specific product and surface type.

This is temperature and humidity dependant please check the product data sheets for full cure schedules.

Resin paint can be applied with a roller or brush in even coats. For screed systems, use a trowel or specialized applicator to spread it evenly over the surface. Always follow the application guidelines.

Most concrete, wood, metal, and tiles are compatible, but each material requires specific preparation steps and in some cases a specific primer. Our surface preparation download provide detailed instructions for different surface types.

Yes, even surfaces that appear clean can have oils, dust, or moisture that interfere with adhesion. Always thoroughly clean and prepare the surface.

If your surface has cracks or holes, they can be repaired before applying resin. We would recommend that any trip hazards are made good prior to application as for small imperfections it down to you as every repair will make the floor more aesthetically pleasing. Small repairs are easily carried out by using one of the Resin Paint repair products, or a thin set filler compound.

Any lose, flaking or failing systems should be removed back to a solid surface. The better job done with the preparation, the better the floor will perform and look upon finishing.

Yes, Resin Paint floor systems can be applied over tile. Ensure there are no lose but they need to be secure to the subfloor with no damage, clean and thoroughly prepared to remove the glaze. This will provided a porous surface for the primer to adhere too. Please note that you will likely get the tile grout lines mirroring through.

Surfaces should be dry clean and free of failing surfaces and laitance. If concrete surfaces have residual moisture or damp issues this could be rectified with applying the required number of coats of Resin Paint Primer DPM.

Tools may include a power sander, scrapers, brushes, and cleaning materials or specialist grinding equipment. If you are unsure please contact us so we can assist you.  If you need any specialist equipment we have this available for hire. Alternatively, if you would preferer an approved contractor to carry out this or the full process we can assist with this.

A primer helps improve adhesion, especially on porous or smooth surfaces. Check the product specifications to determine if primer is necessary for your project.

Proper surface preparation is key. Clean the surface thoroughly, removing dirt, oil, grease, and loose particles. Then for the best adhesion mechanical preparation is recommended. Depending on the substrate, you may need to sand, grind or prime the surface before applying resin.

The quantity required depends on the size of the area, surface porosity, texture and the product being used. We provide approximate coverage rates for each product to help you calculate the amount needed. It’s always a good idea to over order to allow for these variations.

Yes, Resin Paint products are perfect for high-traffic areas like garages and workshops. They offer enhanced durability, stop that annoying dust associated with concrete surfaces and are easy to clean, keeping your floors looking great.

Yes, Resin Paint products are versatile and can be used for both decorative finishes and industrial flooring surfaces. Combining Resin Paint coloured finished with decorative flakes or quartz then sealed with Resin Paint clear sealers this provides a decorative hardwearing surface can be achieved.

Yes, Resin Paint coatings can be applied over most existing painted floors, provided the surface is clean, dry, and properly prepared. Consult our surface preparation guidelines for more details.

Most of our products are designed with low VOC (volatile organic compounds) content, making them safer for both the environment and indoor air quality. All products are made in the UK so the delivery miles to you are as good as we can provide.

Absolutely! See the individual products for selected colours for that product or alternately go to the info hub and download our colour charts

Yes, we offer both indoor and outdoor solutions. External products are designed to withstand UV exposure, temperature changes, and moisture, while indoor products focus on durability and aesthetics.

The best Resin Paint product depends on your specific needs. Environment, trafficking and chemical resistance need to be taken into account. If your not sure contact us for specification assistance. 

Yes, we offer food-safe Resin Paint and screed solutions that support your good hygiene and safety standards required in commercial kitchens and food production environments. Our systems can be easily cleaned, are slip resistant and are seamless.